SUPERVISORY INTERDISCIPLINARY COMMUNITY PLANNER/ENGINEER/ARCHITECT

SUPERVISORY INTERDISCIPLINARY COMMUNITY PLANNER/ENGINEER/ARCHITECT You will serve as a SUPERVISORY INTERDISCIPLINARY COMMUNITY PLANNER/ENGINEER/ARCHITECT in the Asset Management Business Line of NAVFAC ROICC NAPLES. Locality pay is not authorized overseas. Yes—This position is eligible for part time, substantial or ad-hoc telework at the discretion of management. Travel Required 25% or less – You may be expected to travel for this position. Travel is dependent upon position description and availability of funding. Yes—Relocation expenses (i.e. PCS) for candidates outside of the commuting area are authorized in accordance with applicable travel regulations and Department of Navy Policy. Relocation incentives as described in 5 USC 5753 may be authorized in accordance with applicable command policy. Current permanent employees, VEOA eligibles, and DoD Military Reserve (MR) and National Guard (NG) Technician Preference eligibles and DoD Retained Grade Preference eligibles. You will implement engineering, financial and administrative techniques and processes. You will ensure the staff utilizes the established processes and electronic tools to ensure accurate collection of Asset Management metrics. You will coordinate the development of facilities project documentation for assigned installation(s). You will provide leadership, coordination, and oversight to accomplish space management analysis and site approval determination. You will conduct briefings, responds to official inquiries, and acts to obtain needed information or assistance, clearances, and permits needed for project coordination. Must be determined suitable for federal employment. Must participate in the direct deposit pay program. New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement. This is an overseas position. You will be subject to and must be able to satisfy the overseas requirements of the 26Jul12 DODI 1400.25 V1230: http://www.esd.whs.mil/Portals/54/Documents/DD/issuances/140025/140025v1230.pdf This position may require travel to places within and outside the contiguous United States which could include remote or isolated sites. You may be required to travel on military and commercial aircraft for extended periods of time. If eligible for permanent change of station, the appointee will be required to sign a transportation agreement to establish a Government time in service requirement of 12 months. Must be able to obtain and maintain a U.S. Passport. May be required to obtain a VISA dependent on the overseas country’s laws/regulations. You will be required to sign the Statement of Understanding for Overseas Employment acknowledging receipt and understanding of the statement of living and working conditions for this location. Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326. Males born after 12-31-59 must be registered for Selective Service. You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal. This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). You must be certified as a Career Field Facilities Engineering Level III. Certification is required within 24 months of appointment. You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment. This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Qualifications This position has a selective placement factor that will be used to screen out ineligible candidates. The selective placement factor is: You must currently be a licensed Professional Engineer (PE) if applying for the 0801, 0810, or 0896 series. You must be a Registered Architect (RA) if applying for the 0808 series. Your license, registration, or certification must be held in a State, the District of Columbia, the Commonwealth of Puerto Rico, or a territory of the United States. NOTE: You must submit a copy of your current license, registration, or certification with your application package. Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor’s degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET) ; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html . OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor’s degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor’s degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to the Basic Education Requirements for this position, your resume must also demonstrate at least one year of specialized experience at the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Provide facility planning to maintain facilities and major systems such as buildings, utilities, roads, piers, and dry docks; 2) Analyze planning, engineering, management, and economic data to resolve problems and formulate appropriate alternatives; 3) Review planning and engineering documents to provide technical advice; and 4) Coordinate the development of facilities project documentation including completion of required real estate and environmental planning, site approvals, and other supporting documentation. Note: This information must be supported in your resume to be considered for this position Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/urlGS-PROF and https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/all-professional-engineering-positions-0800/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: 0801/0810/0896 General Engineer Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor’s degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET) ; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html . OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor’s degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor’s degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. 0808 Architect Successful completion of a bachelor’s or higher degree in architecture. OR Successful completion of a bachelor’s or higher degree in a field related to architecture that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR Have a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The curriculum for a degree is in either architecture or architectural engineering and covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities OR You lack a degree in architecture, but have 1 year of experience in an architect’s office or in architectural work for each year short of graduation from a program of study in architecture that demonstrates that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. (Note – In the absence of college courses, 5 years of such experience is required). 0020 Community Planner Degree: community planning; or related field such as urban affairs, architecture, landscape architecture, engineering, sociology, geography, economics, political science, or public administration that included at least 12 semester hours in the planning process, socioeconomic and physical elements of planning, urban and regional economic analysis, and development finance.Note: Applicants with degrees in related fields, such as those listed above, who do not have the 12 semester hours of specified course work must have had at least 1 year of work experience in community planning acquired under the supervision and guidance of a community planner. OR Combination of education and experience: courses equivalent to a major in one of the above disciplines, or a combination of related courses totaling at least 24 semester hours in any combination of the above disciplines of which at least 12 semester hours were in the planning process, and socioeconomic and physical elements of planning, plus appropriate experience or additional education. Additional information This position is covered by the Department of Defense Priority Placement and Alternate Placement Programs. Additional vacancies may be filled by this announcement. Pay retention may be granted when certain conditions are met. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf Tour of duty will be 36 Months To learn more about the living and working conditions at this military installation and additional Foreign Overseas information, please go to: https://www.secnav.navy.mil/donhr/Overseas/Pages/default.aspx Priority consideration will be given to military spouse preference and family member preference eligible residing in the commute area of the duty location for this position. Commute area is defined as the geographic area surrounding the duty location in which people can reasonably be expected to travel back and forth daily. Military Spouses and Family Members may apply 30 days before their anticipated arrival date. However, they will not receive preference until arrival at the foreign location. Additional documentation may be required prior to granting preference. Military spouses and family members who are appointed may not extend longer than 2 months following the transfer of the sponsor from the commuting area of the foreign duty station; 2 months beyond the separation of the appointee’s sponsor; or any time beyond the time employee ceases to be a family member. ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate for this vacancy, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/ You will be evaluated for this job based on how well you meet the qualifications above. In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience. When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and responses to the Occupational Questionnaire, along with your supporting documentation to determine your ability to demonstrate the following competencies: FACILITIES ENGINEERING MANAGING HUMAN RESOURCES PUBLIC PLANNING SURVEYS AND DATA COLLECTION You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation. If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment. All eligibility, qualifications, and time-in-grade requirements must be met by the closing date of this announcement. J-18808-Ljbffr